TOHATSU MFS 40A Owner's Manual page 67

Item
• Make sure that steering handle and remote control is
Steering
Devices
functioning normally.
• Check if the anode is securely installed.
Other parts
• Check the anode for corrosion and deformation.
ENOM00081-D
Oil level checking
If the oil level is low, or too high, the life
of the engine will be shortened signifi-
cantly.
1. Place the engine in a vertical position.
2. Remove the top cowl.
3. Remove the dipstick.
4. Wipe oil off the dipstick with a clean
cloth.
5. Insert the dipstick to the hole com-
pletely.
6. Remove the dipstick again. Check the
oil level on the dipstick. Oil level must
be between the upper limit and lower
limit shown on the dipstick.
7. Return the dipstick.
1
1. Filler cap
2. Dipstick
Points to Check
1. Upper level 2200 mL
2. Lower level 1700 mL
ENON00024-0
Note
The oil level should be checked when the
engine is cooled.
ENON00025-0
Note
Consult with an authorized dealer if the
engine oil is milky color, or appears con-
taminated.
ENOM00082-A
Engine oil replenishing
ENOW00079-A
Do not add engine oil of brand and grade
other than existing one. In case engine oil
2
of other brand or grade is added, drain all
ENOF00920-0
oil and ask dealer for treatment.
In case other than engine oil such as gaso-
line is put in the oil chamber, empty the
chamber and ask dealer for treatment.
When replenishing engine oil, be careful
not to allow entry of foreign matters such
as dust and water into oil chamber.
INSPECTION AND MAINTENANCE
Remedy
Repair
Repair if necessary
Replace
1
2
CAUTION
67
ENOF00081-0
10