GAS GAS MC 350F 2023 Owner's Manual page 78

11 SERVICE WORK ON THE CHASSIS
76
–
Now press the fluid into the system until it emerges from hole
of the master cylinder without bubbles.
–
Occasionally extract the fluid from the master cylinder reservoir to
prevent overflowing.
–
Tighten the bleeder screw and remove the bleeding syringe with the
hose. Mount the protection cap.
–
Correct the fluid level of the hydraulic clutch.
Guideline
Fluid level below container rim
H04932-10
–
Position the cover with the membrane. Mount and tighten the
screws.
6
4 mm (0.16 in)