GAS GAS MC 350F 2023 Owner's Manual page 84

12 BRAKE SYSTEM
82
–
Manually press the brake caliper toward the brake disc to push back
the brake pistons. Ensure that brake fluid does not flow out of the
brake fluid reservoir, extract some if necessary.
Info
Make sure that you do not press the brake caliper against
the spokes when pushing back the brake pistons.
–
Remove cotter pins
ings.
–
Clean the brake caliper and the brake caliper bracket.
J00078-10
–
Check that spring plate
7
ing plate in the brake caliper bracket are seated correctly.
J00080-10
–
Insert the new brake linings, insert pin
4
pins .
Guideline
Mount the outer cotter pins from the front to the rear.
Mount the inner cotter pins from the rear to the front.
Info
Always change the brake linings in pairs.
–
Operate the hand brake lever repeatedly until the brake linings are
in contact with the brake disc and there is a pressure point.
J00079-10
4 5
, pull out pin , and remove the brake lin-
6
in the brake caliper and brake pad slid-
5
, and mount cotter