GAS GAS MC 350F 2023 Owner's Manual page 68

11 SERVICE WORK ON THE CHASSIS
66
Main work
–
Check the throttle cable routing. (
–
Position the fuel tank and fit the two spoilers laterally to the radia-
tor.
–
Make sure that no cables or throttle cables are trapped or damaged.
–
Attach the fuel tank breather hose to the fuel tank lid.
–
Mount and tighten screws
Guideline
Screw, fuel tank spoiler
on radiator
A00789-11
(MC)
–
Mount and tighten screw
Guideline
Remaining screws,
chassis
A00786-11
–
Plug in connector
–
Remove the wash cap set. Clean the quick release coupling thor-
oughly with compressed air.
Info
Under no circumstances should dirt enter into the fuel
line. Dirt in the fuel line clogs the injection valve!
–
Spray silicone spray onto a lint-free cleaning cloth and lightly
lubricate the O-ring of the quick-release coupling.
A00785-11
Silicone spray (
–
Join quick release coupling
Info
Route the cable and fuel line at a safe distance from the
exhaust system.
(EX)
–
Mount and tighten screw
Guideline
Remaining screws,
chassis
A00788-11
p. 72)
1
with the collar bushings.
M6 6 Nm (4.4 lbf ft)
2
with the rubber bushing.
M6 10 Nm (7.4 lbf ft)
3
for the fuel pump.
p. 132)
4
.
2
with the rubber bushing.
M6 10 Nm (7.4 lbf ft)