Table of Contents
Advertisement
Step 3: Enter the encryption key of the wireless AP
(1) Enter the encryption key that is configured in
(2) Click the [OK] button.
If you will be connecting to this Wireless AP in the future, check [Remember this
network].
Step 4: Check if the AirPort is connected to the selected wireless network.
If "Yes", then there will be a "check" symbol in front of the SSID.
section 5.7.2.1
Figure 6-12 Enter the Password
Figure 6-13 Connected to the Network
-81-
User Manual of WDAP-C7210E
Advertisement
Table of Contents
