Table of Contents
Advertisement
Block UDP Flood
Block ICMP Flood
IP TearDrop
Ping Of Death
TCP packets with SYN and
FIN Bits set
TCP packets with FIN Bit set
but no ACK Bit set
TCP packets without Bits set
Block WAN Ping
HTTP Port
HTTPs Port
Remote Management
Temporarily block when login
failed
IP blocking period
Blocked IP
FTP ALG
TFTP ALG
RTSP ALG
H.323 ALG
SIP ALG
If the function is enabled, when the number of the current
UPD-FLOOD packets is beyond the set value, the router will start
the blocking function immediately.
The default configuration is disabled.
ICMP is kind of a pack of TCP/IP; its important function is to transfer
simple signal on the Internet. There are two normal attack ways
which hackers like to use, Ping of Death and Smurf attack.
The default configuration is disabled.
If the function is enabled, the router will block Teardrop attack that is
targeting on TCP/IP fragmentation reassembly codes.
If the function is enabled, the router will block Ping of Death attack
that aims to disrupt a targeted machine by sending a packet larger
than the maximum allowable size causing the target machine to
freeze or crash.
Set the function as enable or disable
Set the function as enable or disable
Set the function as enable or disable
Enable the function to allow the Ping access from the Internet
network.
The default configuration is disabled.
The default is 80.
The default is 443.
Enable the function to allow the web server access of the router from
the Internet network.
The default configuration is disabled.
The default is 0. (0 means no limit)
The default is 0. (0 means permanent blocking)
0.0.0.0
Set the function as enable or disable
Set the function as enable or disable
Set the function as enable or disable
Set the function as enable or disable
Set the function as enable or disable
-57-
User Manual of WDAP-C7210E
Advertisement
Table of Contents
