Table of Contents
Advertisement
User Manual of WDAP-C7210E
Step 1. Use static IP in the PCs that are connected with AP-1 (Site-1) and AP-2 (Site-2). In this case, Site-1 is
"192.168.1.100", and Site-2 is "192.168.1.200".
Step 2. For AP-1, go to "Operation Mode" to configure it to AP Mode. For AP-2, configure it to Repeater Mode.
AP-1
Note: Set a fixed channel for the root AP (AP-1), please don't set auto channel.
-90-
Advertisement
Table of Contents
