Planet WDAP-C7210E User Manual page 94

Hide thumbs Also See for WDAP-C7210E:

Table of Contents

User Manual of WDAP-C7210E

AP-2

Step 3. For AP-2, change the default IP to the same IP range but different from AP-1. In this case, the IP of AP-2

is changed to 192.168.1.252 and the IP of AP-1 is set to 192.168.1.253.

Suggestion: It is better to set to static IP for those APs. It could avoid you to unable to find and control those APs by NMS

series or AP controller function, especially when an AP gets a new IP from DHCP server.

Step 4. For AP-2, press Scan to search for AP-1. You can also enter the BSSID (MAC address), SSID,

encryption and bandwidth if you know what they are.

-91-

Table of Contents