5.2.3 UPnP
Object
UPnP
5.2.4 Routing
Please refer to the following sections for the details as shown in
Routing tables contain a list of IP addresses. Each IP address identifies a remote router (or other network
gateway) that the local router is configured to recognize. For each IP address, the routing table additionally
stores a network mask and other data that specifies the destination IP address ranges that remote device will
accept.
Figure 5-28: UPnP
Set the function as enable or disable
Figure 5-29: Routing table
Figure 5-30: Routing setup
-48-
User Manual of WDAP-C7210E
Description
Figures 5-30 and
31.