Planet WDAP-C7210E User Manual page 49

Hide thumbs Also See for WDAP-C7210E:
Table of Contents

Advertisement

Object
Please select the corresponding WAN Access Type for the Internet, and fill
out the correct parameters from your local ISP in the fields which appear
below.
WAN Access Type
Static
Figure 5-26: WAN
Description
Select Static IP Address if all the Internet ports' IP information is
provided to you by your ISP (Internet Service Provider). You will
need to enter the IP address, Netmask, Gateway, and DNS Server
provided to you by your ISP.
Each IP address entered in the fields must be in the appropriate IP
form, which are four octets separated by a dot (x.x.x.x). The router
will not accept the IP address if it is not in this format.
IP Address
Enter the IP address assigned by your ISP.
Netmask
Enter the Subnet Mask assigned by your ISP.
Gateway
Enter the Gateway assigned by your ISP.
DNS Server
The DNS server information will be supplied by your ISP.
-46-
User Manual of WDAP-C7210E

Advertisement

Table of Contents
loading

Table of Contents