Table of Contents
Advertisement
5.4.5 Wi-Fi Advanced
This page allows the user to define advanced setting of Wi-Fi.
Object
2.4GHz Maximum Associated Clients
5GHz Maximum Associated Clients
2.4G Coverage Threshold
5G Coverage Threshold
2.4G TX Power
5G TX Power
2.4GHz WLAN Partition
5GHz WLAN Partition
RTS Threshold
Figure 5-52: Wi-Fi Advanced
The maximum users are 75
The maximum users are 75
The coverage threshold is to limit the weak signal of clients occupying
session. The default is -95dBm
The coverage threshold is to limit the weak signal of clients occupying
session. The default is -95dBm
The range of transmit power is Max (100%), Efficient (75%),
Enhanced (50%), Standard (25%) or Min (15%). In case of shortening
the distance and the coverage of the wireless network, input a smaller
value to reduce the radio transmission power
The range of transmit power is Max (100%), Efficient (75%),
Enhanced (50%), Standard (25%) or Min (15%). In case of shortening
the distance and the coverage of the wireless network, input a smaller
value to reduce the radio transmission power
Set the function as enable or disable
Set the function as enable or disable
Enable or Disable RTS/CTS protocol. It can be used in the following
scenarios and used by Stations or Wireless AP.
1) When medium is too noisy or lots of interferences are present. If
the AP/Station cannot get a chance to send a packet, the RTS/CTS
mechanism can be initiated to get the packet sent.
2) In mixed mode, the hidden node problem can be avoided.
The default value is 2347
-69-
User Manual of WDAP-C7210E
Description
Advertisement
Table of Contents
