Table of Contents
Advertisement
User Manual of WDAP-C7210E
Ceiling-mount Design for Your Environment
With the standard IEEE802.3at Power over Ethernet (PoE) design, the WDAP-C7210E can be easily installed in
the areas where power outlets are not available. By supporting the standard IEEE 802.3at PoE PD power
scheme, the WDAP-C7210E can be powered and networked by a single UTP cable, effectively eliminating the
needs of dedicated electrical outlets on the ceiling and reducing the cabling cost. Furthermore, the system
administrator is able to arrange the PoE schedule of the WDAP-C7210E by working with the managed PoE
switch.
Optimized Efficiency in AP Management
The brand-new GUI configuration wizard helps the system administrator easily set up the WDAP-C7210E step
by step. Besides, the built-in Wi-Fi analyzer provides real-time channel utilization to prevent channel overlapping
to assure greater performance. With the automatic transmission power mechanism, distance control and
scheduled reboot setting, the WDAP-C7210E is easy for the administrator to deploy and manage without on-site
maintenance. Moreover, you can use PLANET NMS controller series, WS switch series, VR series, ICG-2515
router series, and AP control function to deliver wireless profiles to multiple APs simultaneously, thus making the
central management simple.
*Note: The WDAP-C7210E and WDAP-C7210E (V2) are two different devices. Please make sure the model is right before setting it
with NMS equipment. Check the model name from the label to make sure that the firmware is upgraded on the right version of the
.
AP
-8-
Advertisement
Table of Contents
