Computer Input; Input Source Selection; Computer ) 7 - Sanyo PLC-XK3010 Owner's Manual

Input Source Selection (RGB: Computer 1/Computer 2)
Direct Operation
Choose either Computer 1(RGB) or Computer 2(RGB) by pressing the COMPUTER 1 or COMPUTER  button on
the remote control.
Before using these buttons, correct input source should be selected through Menu operation as described below.
Remote Control
Menu Operation
1
Press the MENU button to display the On-Screen
Menu. Use the Point ▲▼ buttons to select Input
and then press the Point ► or the SELECT button.
2
Use the Point ▲▼ buttons to select Computer 1.
OR
Use the Point ▲▼ buttons to select Computer 2
and then press the SELECT button.
3
When Computer 1 is selected, press the Point
► button to access the submenu items. Use the
Point ▲▼ buttons to select the RGB input source
and then press the SELECT button.
Note:
When the Input Search function is set to
On 1 or On 2 in the Auto setup function, the
input signal will be searched automatically
(p.45).
Computer Input
COMPUTER 1 button
Computer 1(RGB)
Computer 1(Scart)
COMPUTER 2 button
Computer 2 (RGB)
Input Menu
Computer
1
7