Sanyo PLC-XK3010 Owner's Manual page 26

Basic Operation
NO SHOW button
Press the NO SHOW button on the remote control to
black out the image. To restore to normal, press the NO
SHOW button again or press any other button. When
the projected image is captured and is set as User in the
Logo selection (p. 46), the screen changes each time
you press the NO SHOW button as follows.
black out→ the captured image → normal → • • • • •
Note:
When use the MUTE button to release the
No Show function, the mute function can not
be operated at the same time.
P-TIMER button
Press the P-TIMER button on the remote control to
operate the Count up/Count down function. Refer to p.50
for detail of Setting for the P-timer function.
To stop the count time, press the P-TIMER button.
To cancel the P-timer function, press and hold the P-
TIMER button.
IMAGE button
Press the IMAGE button on the remote control to select
a desired image mode of the screen. See pages 3, 39
for details.
SCREEN button
Select the screen size (See pages 34-35, 4-43 for
details).
6
Remote Control
Note:
See the previous page for the description of
other buttons.
No Show
No show disappears after 4 seconds.
P-Timer
SCREEN button
P-TIMER button
NO SHOW button
IMAGE button