Manual Pc Adjustment; Current Mode - Sanyo PLC-XK3010 Owner's Manual

Computer Input
Some computers employ special signal formats which may not be tuned by Multi-scan system of this projector. Manual
PC Adjustment enables you to precisely adjust several parameters to match those signal formats. The projector has five
independent memory areas to store those parameters manually adjusted. It allows you to recall the setting for a specific
computer.
1
Press the MENU button to display the On-Screen
Menu. Use the Point ▲▼ buttons to select PC
adjust and then press the Point ► or the SELECT
button.
2
Use the Point ▲▼ buttons to select the desired
item and then press the SELECT button to display
the adjustment dialog box. Use the Point ◄►
buttons to adjust the setting value.
Fine sync
Use the Point ◄► buttons to adjust the value,
eliminating a flicker from the image displayed (from 0 to
31).
Total dots
Use the Point ◄► buttons to adjust the number of total
dots in one horizontal period to match your PC image.
Horizontal
Use the Point ◄► buttons to adjust the horizontal
picture position.
Vertical
Use the Point ◄► buttons to adjust the vertical picture
position.

Current mode

Press the SELECT button to show H-sync freq. and V-
sync freq. of the connected computer.
Clamp
Use the Point ◄► buttons to adjust the clamp level.
When the image has dark bars, try this adjustment.
Display area H
Use the Point ◄► buttons to adjust the horizontal area
displayed by this projector.
Display area V
Use the Point ◄► buttons to adjust the vertical area
displayed by this projector.
30
Manual PC Adjustment
PC adjust Menu