Computer Input; Input Source Selection (Rgb: Computer 1 (Analog)/Computer 2 ) - Sanyo PLC-WXU30 Owner's Manual

Computer Input

Input Source Selection (RGB: Computer 1 (Analog)/Computer 2 )

Direct Operation
Choose either Computer 1 (Analog) or Computer 2 by
pressing the INPUT button on the top control or press the
COMPUTER button on the remote control.
Before using these buttons, correct input source should be
selected through Menu operation as described below.
Menu Operation
1 Press the MENU button to display the On-Screen
Menu. Use the Point
frame pointer to the Input Menu icon.
2
Use the Point
pointer to either Computer 1 (Analog) or Computer 2,
and then press the SELECT button.
3 When selecting Computer 1 (Analog), RGB input
source will be selected directly.
When selecting Computer 2, the Source Select Menu
appears. Move the pointer to RGB and then press the
SELECT button.
Notes:
• Wired and Wireless are for the Network function. See
owner's manual "Network Set-up and Operation" .
• When the Input Search function is set to "On1" or "On2",
the input signal will be searched automatically (p.51).
30
buttons to move the red
buttons to move the red arrow
INPUT button
Top Control
Computer 1 (Analog)
Computer 1 (Digital)
Remote Control
COMPUTER button
Computer 1 (Analog)
Computer 1 (Digital)
Input Menu icon
Input Menu
Input Menu icon
Input Menu
Computer
2
Move the pointer
(red arrow) to RGB.
Computer 2
Video
Wired
Wireless
Computer 2
Move the pointer (red
arrow) to Computer 1
(Analog) and press the
SELECT button.
Move the pointer (red
arrow) to Computer 2
and press the SELECT
button.