Remote Control Operation 5 - Sanyo PLC-XK3010 Owner's Manual

Using the remote control for some frequently used operations is advisable. Just pressing one of the buttons enables
you to make the desired operation quickly without calling up the On-Screen Menu.
COMPUTER 1/2, VIDEO, S-VIDEO and
COMPONENT buttons
Press the COMPUTER 1/, VIDEO, S-VIDEO and
COMPONENT buttons on the remote control to select
the input source. See pages 7, 36-37 for details.
FREEZE button
Press the FREEZE button on the remote control to
freeze the picture on the screen, meanwhile, volume
is muted. To cancel the Freeze function, press the
FREEZE button again or press any other button.
Fig.1 will appear on the screen while the Freeze
function is working.
Fig.1
INFO. button
Display the input source information: Input, H-sync
freq., V-sync freq., Screen, Language, Lamp status,
Lamp counter, Power management, Key lock, PIN
code lock, Remote control and SERIAL NO. (p.57).
D.ZOOM buttons
Press the D.ZOOM buttons on the remote control to
enter to the Digital zoom +/– mode. See page 35 for
details.
LAMP button
Press the LAMP button on the remote control to select
the lamp mode for changing the brightness on the
screen.
High .............. Brighter than the Normal mode.
Normal . ......... Normal brightness
Eco ............... Lower brightness reduces the lamp
power consumption and extends the
lamp life.
Remote Control Operation
Remote Control
COMPUTER 1/2
buttons
VIDEO
button
FREEZE
button
D.ZOOM
buttons
Note:
See the next page for the description of
Basic Operation
other buttons.
COMPONENT
button
S-VIDEO
button
INFO. button
LAMP button
5