Pj Link Notice; Attaching The Filter Cover To The Projector 7 - Sanyo PLC-XK3010 Owner's Manual

This projector is compliant with PJLink Standard Class 1 of JBMIA (Japan Business Machine and
Information System Industries Association). This projector supports all commands defined by PJLink
Class 1 and is verified conformance with PJLink Standard Class 1.
For PJ Link password, see the owner's manual of "Network Set-up and Operation."
Projector Input
Computer 1
Computer 
Video
PJLink is a registered trademark of JBMIA and pending trademark in some countries.
The supplied filter cover is designed for
preventing dust accumulation on the filter
when mounting the projector on the ceiling.
1
Turn over the projector.
2
Place the filter cover on the filter as the
picture shown below.
3
Attach the projector to the ceiling mount
in accordance with the instruction manuals
which come with the ceiling mount.
Note:

To keep the filter cover in position, be
sure to attach the drop-prevention wire by
threading it through the hole of the filter
cover.
Pj Link Notice
RGB
Component
RGB (Scart)
S-video
RGB
Video
Attaching the Filter Cover to the Projector
PJLink Input
RGB 
RGB 3
RGB 5
RGB 4
RGB 1
VIDEO 
To Ceiling Mount
Drop-prevention Wire
(not supplied)
Front feet
Appendix
Parameter
1
13
15
14
11

Hole
Filter Cover
(supplied)
Caps
Projector
73