Connecting To A Computer - Sanyo PLC-XK3010 Owner's Manual

Installation
Cables used for connection
• VGA Cables (Mini D-sub 15 pin) *(Only one cable is supplied.)
• Audio Cables
(*One cable is supplied; other cables are not supplied with the projector.)
Audio Output
Audio
cable
(stereo)
Note:
• When the MIC function is set to Off in the Sound menu, the MIC function is disabled.
•When MIC is set to On in Sound Menu, AUDIO IN (PC/MIC) and AUDIO IN(L/R) terminals can be
connected at the same time. At this time, AUDIO IN (PC/MIC) termianl as MIC input, AUDIO IN(L/R)
terminal is as COMPUTER or VIDEO audio input.
• I nput sound to the AUDIO IN terminal when using the COMPUTER IN 1/ S-VIDEO IN / COMPONENT
IN and the COMPUTER IN /MONITOR OUT terminals as input.
• W hen the AUDIO OUT is plugged-in, the projector's built-in speaker is not available.
•When the cable is of the longer variety, it is advisable to use the COMPUTER IN 1 /S-VIDEO IN/
COMPONENT IN and not the COMPUTER IN /MONITOR OUT.
Unplug the power cords of both the projector and external equipment from the AC outlet before connecting
cables.
14

Connecting to a Computer

Monitor Input
Monitor or
Output Monitor Output
VGA
VGA
cable
cable
COMPUTER
COMPUTER IN 1
IN  /
/ S-VIDEO IN
MONITOR OUT
/COMPONENT IN
AUDIO IN (PC or MIC)
Audio Output
When using AUDIO
IN(PC/MIC) terminal
as MIC input,
connect to this
terminals for PC
audio input.
This terminal is
switchable. Set up
PC AUDIO
the terminal as either
IN
Computer input or
Monitor output. (See
Page 49.)
AUDIO OUT
(stereo)
(MIC)-
External Audio Equipment
Audio Input
Audio cable
(stereo)