Video Input; Input Source Selection (Video, S-Video) - Sanyo PLC-XK3010 Owner's Manual

Direct Operation
Choose Video or S-video by pressing the VIDEO or the
S-VIDEO button on the remote control.
Before using these buttons, correct input source should
be selected through menu operation as described below.
Menu Operation
1
Press the MENU button to display the On-Screen
Menu. Use the Point ▲▼ buttons to select Input
and then press the Point ► or the SELECT button.
2
Use the Point ▲▼ buttons to select Video and then
press the SELECT button.
When video input signal is connected to the
Video
VIDEO jack, select Video.
Use the Point ▲▼ buttons to select Computer 1. And
then press the Point ► button to access the submenu
items. Use the Point ▲▼ buttons to select the S-video
and then press the SELECT button.
When the input source is coming from video
S-video
equipment connected to the COMPUTER
IN 1/S-VIDEO IN/COMPONENT IN terminal
with a S-video-VGA cable, select S-video.
Note:

When the Input Search function is set to
On 1 or On 2 in the Auto setup function, the
input signal will be searched automatically
(p.45).
36
Video Input
Input Source Selection (Video, S-video)
Remote Control
Video
S-video
Press the Point ▲▼ buttons to
Computer
select S-video.
1
VIDEO button
Video
S-VIDEO button
S-video