Computer Input; Input Source Selection (Rgb: Computer 1/Computer 2) - Sanyo LC-XBL20 Owner's Manual

Computer Input

Input Source Selection (RGB: Computer 1/Computer 2)

Direct Operation
Choose either Computer 1(RGB) or Computer 2(RGB) by pressing the COMPUTER 1 or Computer 2 button
on the remote control.
Before using these buttons, correct input source should be selected through Menu operation as described
below.
Remote Control
Menu Operation
Press the MENU button to display the On-Screen
1
Menu. Use the Point
then press the Point
Use the Point
▲▼
2
When Computer 1 is selected, press the Point
3
button to access the submenu items. Use the Point
buttons to select the RGB input source and then
▼
press the SELECT button.
 Note:
When the Input Search function is set to On1 or On2 in
the Auto setup function, the input signal will be searched
automatically (p.44).
COMPUTER 1 button
Computer 1(RGB)
Computer 1(Scart)
COMPUTER 2 button
Computer 2 (RGB)
buttons to select Input and
▲▼
or the SELECT button.
►
buttons to select Computer 1.
Input Menu
►
▲
Computer
1
27