Noise Reduction - Sanyo PLC-XK3010 Owner's Manual

Noise reduction

Noise interference on the screen can be reduced.
Select one of the following options to get smoother
images.
Off ......... Disabled.
L 1 ......... Lower reduction
L 2 ......... Higher reduction
Progressive
An interlaced video signal can be displayed in
progressive mode. Select one of the following options.
Off ......... Disabled.
L 1 ......... For an active picture.
L 2 ......... For a still picture.
Film ....... For watching a film. With this function, the
projector reproduces pictures faithful to the
original film quality.
Reset
To reset the adjusted data, select Reset and press the
SELECT button. A confirmation box appears and then
select Yes. All adjustments will return to their previous
figures.
Store
To store the adjusted data, select Store and press the
Point ► or the SELECT button. Use the Point ▲▼
buttons to select one from Image 1 to 4 and press the
SELECT button.
A confirmation box appears and then select Yes.
Stored data can be called up by selecting an Image
(1–4) in the Image Mode Selection on page 39.
Note:

Noise reduction and Progressive can not be selected when the input signal is 480p, 575p,
720p, 1035i or 1080i (p.38).
Store Menu
A confirmation box
appears and then
select Yes.
Video Input
41