Sanyo PLC-XK3010 Owner's Manual page 54

Setting
Enter a PIN code
Use the Point ▲▼ buttons to enter a number. Press the
Point ◄ ► buttons to fix the number and move the red
frame pointer to the next box. The number changes to
. If you fixed an incorrect number, use the Point ◄ ►
buttons to move the pointer to the number you want to
correct, and then enter the correct number.
Repeat this step to complete entering a four-digit
number.
After entering the four-digit number, move the pointer to
Set. Press the SELECT button so that you can change
the following PIN code lock setting.
If you entered an incorrect PIN code, PIN code and the
number () will turn red for a moment. Enter the
correct PIN code all over again.
Change the PIN code lock setting
Use the Point ▲▼ buttons to select Off, On 1 or On 2,
and then press the SELECT button to make a choice.
Change the PIN code
The PIN code can be changed to your desired four-
digit number. Press the SELECT button to select PIN
code change. Pin code dialog box appears, use the
Point ▲▼ buttons to enter the correct code. The New
PIN code input dialog box appears. Set a new PIN
code.
CAUTION:
WHEN YOU HAVE CHANGED THE PIN CODE,
WRITE DOWN THE NEW PIN CODE IN COLUMN
OF THE PIN CODE NO. MEMO ON PAGE 75, AND
KEEP IT SECURELY. IF YOU FORGET YOUR PIN
CODE, THE PROjECTOR CAN NO LONGER BE
STARTED.
54
Enter a PIN code
Change the PIN code
Current PIN code