Sanyo PLC-XK3010 Owner's Manual page 43

Keystone
This function is used to adjust keystone distortion of the
projected image. Use the Point ▲▼ buttons to choose
the item you want to adjust.
Keystone
T o correct keystone distortion, press the SELECT
button.
Keystone appears on the screen. Use the Point ▲▼
buttons to correct keystone distortion (p. 3).
Store or Reset
T o store or reset the keystone correction, press the
Point ► button.
Store ............. K eep the keystone correction
even when the AC power cord is
unplugged.
Reset . ............ R elease the keystone correction when
the AC power cord is unplugged.
Ceiling
When this function is set to On, the picture will be top/
bottom and left/right reversed. This function is used to
project the image from a ceiling-mounted projector.
Rear
When this function is set to On, the picture will be
left/right reversed. This function is used to project the
image from rear of the screen.
Reset
To reset the adjusted data, select Reset and press the
SELECT button. A confirmation box appears and then
select Yes. All adjustments will return to their previous
figures.
Keystone
Ceiling
Rear
Video Input
43