Computer Input; Input Source Selection (Computer 1: Rgb ) - Sanyo PLC-XU4000 Owner's Manual

Choose Computer 1(RGB) or Computer 1(Scart) by pressing the INPUT button on the top control or press the
COMPUTER 1 button on the remote control.
Before using INPUT button, correct input source should be selected through Menu operation as described
below.
Remote Control
1
Press the MENU button to display the On-Screen
Menu. Use the Point
then press the Point
2
Use the Point
then press the Point
3
Use the Point
press the SELECT button.
 Note:
When the Input Search function is set to On1 or On2 in
the Auto setup function, the input signal will be searched
automatically (p.47).
Downloaded From projector-manual.com Sanyo Manuals

Computer Input

Input Source Selection (Computer 1: RGB )

Direct Operation
COMPUTER 1 button
Computer 1(RGB)
Computer 1(Scart)
Menu Operation
buttons to select Input and
▲▼
or the SELECT button.
►
buttons to select Computer 1 and
▲▼
button.
►
buttons to select RGB and then
▲▼
Top Control
INPUT button
Input Menu
Computer
1
Computer 1(RGB) /
(Component) / (Scart)
Computer 2(RGB)
Video
S-video
27