Installation; Positioning The Projector; Adjustable Foot - Sanyo PLC-XK3010 Owner's Manual

For projector positioning, see the figures below. The projector should be set perpendicularly to the plane of the
screen.
Note:
• The brightness in the room has a great influence on picture quality. It is recommended to limit
ambient lighting in order to obtain the best image.
• All measurements are approximate and may vary from the actual sizes.
A : B = 6:1
3.6'(1.1m)
Screen Size
(W x H) mm
4 : 3 aspect ratio
Zoom (max)
Zoom (min)
Projection angle can be adjusted up to 10.0 degrees
with the adjustable foot.
Lift the front of the projector and push the foot lock
latch on the projector.
Release the foot lock latch to lock the adjustable foot
and rotate the adjustable foot to adjust the position
and tilt.
To retract the adjustable foot, lift the front of the
projector and push and undo the foot lock latch.
Keystone distortion of the projected image can be
corrected by menu operation. (see pages 3, 35, 43,
45)

Installation

Positioning the Projector
28.6'(8.7m)
19.1'(5.8m)
14.3'(4.4m)
9.5'(2.9m)
150"
100"
125
40"
83
40" 100"
813 x 610 2032 x 1524
3.6'(1.1m) 9.5'(2.9m)
4.5'(1.4m) 11.4'(3.5m)
Adjustable Foot
34.4'(10.5m)
300"(wide)
Max. Zoom
200"
250
167
150" 200"
3048 x 2286 4064 x 3048
14.3'(4.4m) 19.1'(5.8m)
17.1'(5.2m) 22.9'(7.0m)
Foot Lock Latch
(Inch Diagonal)
300"(tele )
Min. Zoom
A
(Center)
B
300"
6096 x 4572
28.6'(8.7m)
34.4'(10.5m)
Adjustable Foot
13