Connecting To A Computer - Sanyo PLC-XU88W Owner's Manual

Connecting to a Computer

Cables used for connection
• VGA Cable (Mini D-sub 15 pin) *
• DVI-VGA Cable
• DVI Cable
• USB Cable
• Audio Cables
(*One cable is supplied; other cables are not supplied with the projector.)
Audio Output
USB cable
Audio cable
(stereo)
COMPUTER/
COMPONENT
AUDIO IN
Notes:
• Input sound to the COMPUTER/COMPONENT AUDIO IN
terminal when using the COMPUTER IN 1/DVI-I and the
COMPUTER IN 2/ COMPONENT IN /MONITOR OUT terminal
as input.
• When the AUDIO OUT is plugged-in, the projector's built-in
speaker is not available.
• When the cable is of the longer variety, it is advisable to use the
COMPUTER IN 1 / DVI-I and not the COMPUTER IN 2 /
COMPONENT IN / MONITOR OUT.
• USB cable connection is needed when operating the computer
with the remote control or using the PAGE ▲▼ buttons on the
remote control.
18
Monitor Output
or
Monitor Output
Monitor Input
DVI DVI
VGA
cable -VGA
cable
cable
COMPUTER IN 2
COMPUTER /COMPONENT IN
IN 1/ DVI-I /MONITOR OUT
This terminal is switchable. Set up
the terminal as Computer2 input or
COMPONENT IN or Monitor output.
(See Page 50.)
External Audio Equipment
Audio Input
Audio cable
(stereo)
AUDIO OUT
(stereo)
Unplug the power cords of both the
projector and external equipment
from the AC outlet before connecting
cables.
Installation