Connecting To A Computer - Sanyo PLC-XU4000 Owner's Manual

Installation
Cables used for connection
(*One cable is supplied; other cables are not supplied with the projector.)
External Audio Equipment
Audio Input
This terminal is
switchable. Set up
the terminal as either
Audio cable
Computer input or
(stereo)
Monitor output.
(See Page 51.)
AUDIO OUT
(stereo)
Note:
MIC is set to On in Sound Menu, COMPUTER AUDIO IN 1, COMPUTER AUDIO IN 2 / MIC IN and
AUDIO IN(L/R) terminals can be connected at the same time. At this time, COMPUTER AUDIO IN 2 termianl
as MIC input. (p 24)
COMPUTER IN 2 / MONITOR OUT and the COMPUTER IN 1/ COMPONENT IN terminal as input.
When the cable is of the longer variety, it is advisable to use the COMPUTER IN 1 / COMPONENT IN and
not the COMPUTER IN 2/ MONITOR OUT.
Unplug the power cords of both the projector and external equipment from the AC outlet before connecting cables.
14

Connecting to a Computer

*
Monitor Input
Monitor Output
VGA VGA
cable cable
COMPUTER MONITOR
IN 2 OUT
Off in the Sound menu, the MIC function is disabled. (p 24)
Monitor Output
Audio Output
VGA
cable
Audio cable
(stereo)
COMPUTER IN 1 /
COMPONENT IN
COMPUTER 1/
COMPUTER 2
AUDIO IN (PC or MIC)