Connecting To The Ibm-Compatible Computer - Sanyo LV-7300 Owner's Manual

CONNECTING THE PROJECTOR

CONNECTING TO THE IBM-COMPATIBLE COMPUTER

To connect with the IBM-compatible computer, refer to the figure below.
Used cables for connection
• VGA CABLE
• CONTROL CABLE FOR PS/2 PORT
• CONTROL CABLE FOR SERIAL PORT
• MONITOR CABLE
• PC AUDIO CABLE (stereo)
These cables are not supplied with this projector.
NOTE :
When connecting the cable, the power cords of both the projector and the external equipment should be
disconnected from AC outlet. Turn the projector and peripheral equipment on before the computer is switched
on.
IBM-COMPATIBLE COMPUTERS (VGA / SVGA / XGA / SXGA)
Desktop type
To the Monitor
12
Monitor
Monitor Output Serial port
VGA Cable (supplied)
Monitor Cable
Laptop type
To each terminal of your computer
Serial port PS/2 port Audio Output
Terminal Terminal
Control Cable for PS/2 Port
Control Cable for Serial Port
Serial Cable (refer to P10.)
Audio Speaker
(stereo)
Audio Amplifier
Audio Input
Audio Cable
(stereo)