Connecting To A Computer (Digital And Analog Rgb) - Sanyo PLC-XT30 Owner's Manual

Installation

Connecting to a Computer (Digital and Analog RGB)

Cables used for connection
• VGA Cable (HDB 15 pin)*
• DVI-Digital Cable
• BNC Cable
(*One cable is supplied; other cables are not supplied with the projector.)
Monitor
Input
VGA
cable
ANALOG
OUT
✔Notes:
•When the AUDIO OUT is plugged-in, the projector's built-in
speaker is not available.
•USB cable connection is needed when operating the computer with
the remote control.
•See page 78 for ordering optional cables.
Unplug the power cords of both the projector and external
equipment from the AC outlet before connecting cables.
22
• USB Cable
• Audio Cables (Mini Plug [stereo] x 2)
Audio
Monitor Output
Output
Audio
BNC
cable
cable
(stereo)
AUDIO
G B R H/V V
IN
Monitor Monitor
USB port
Output Output
VGA DVI-Digital USB
cable cable cable
ANALOG DIGITAL
IN (DVI-D)
External Audio Equipment
Audio Input
USB
Audio cable
(stereo)
AUDIO OUT
(stereo)