Mars Comfort-Aire Century VCD-SA Series Service Manual page 201

Service Manual - VCDxxSA
13. PCB board 13
Procedure
1) Remove 4 screws unfix the radiator.
(see CJ_ODU_PCB_013-1)
2) Remove 3 screws unfix the electronic
control box assembly and partition
board. (see CJ_ODU_PCB_013-1)
3) Remove 2 screws unfix the electronic
control box assembly and terminal
board subassembly. (see CJ_ODU_
PCB_013-1)
4) Move upward and slowly remove
the electronic control box assembly.
(CJ_ODU_PCB_013-2)
(If you want to repair the electrical
control box components, perform the
steps 1 to 4;If you want to repair the
main control board assembly, perform
steps 5 to 7 below.)
Note: This section is for reference only. Actual unit appearance may vary.
Illustration
Outdoor Unit Disassembly 32

CJ_ODU_PCB_013-1
CJ_ODU_PCB_013-2
