Mars Comfort-Aire Century VCD-SA Series Service Manual page 200

12. PCB board 12
Procedure
1) Pull out the connectors (see CJ_
ODU_PCB_012-1 ).
2) Remove the 9 screws and unfix
the 3 hooks and then remove the
electronic control board(see CJ_
ODU_PCB_012-2 ).
3) Disconnect the wires connected to
main control board. (see CJ_ODU_
PCB_012-2)(for some models)
4) Remove the 2 screws and then
remove the DC motor driver board.
(see CJ_ODU_PCB_012-2 )(for some
models)
Note: This section is for reference only. Actual unit appearance may vary.
Illustration
Outdoor Unit Disassembly 31

Service Manual - VCDxxSA
CJ_ODU_PCB_012-1
CJ_ODU_PCB_012-2
(for some models)
