Mars Comfort-Aire Century VCD-SA Series Service Manual page 196

Procedure
7) Remove 3 screws to disconnect the
power supply wires. (see CJ_ODU_
PCB_009-1)
8) Remove 3 screws to disconnect
ground wires. (see CJ_ODU_
PCB_009-1)
9) Disconnect the wires connected to
main control board. (see CJ_ODU_
PCB_009-2)
10) Remove the 4 screws and unfix the
4 hooks and then remove the filter
board.(see CJ_ODU_PCB_009-2 )
11) Remove the 2 screws of the reactor
and then remove it . (see CJ_ODU_
PCB_009-2)
12) Disconnect the wires connected to
main control board. (see CJ_ODU_
PCB_009-3)(for some models)
13) Remove the 2 screws and then
remove the DC motor driver board.
(see CJ_ODU_PCB_009-3 )(for some
models)
Note: This section is for reference only. Actual unit appearance may vary.
Illustration
Outdoor Unit Disassembly 27

Service Manual - VCDxxSA
CJ_ODU_PCB_009-2
CJ_ODU_PCB_009-3
(for some models)
