Mars Comfort-Aire Century VCD-SA Series Service Manual page 184

3. PCB board 3
Procedure
1) Remove the screws and unfix the
hooks, then open the electronic
control box cover (5 screws and 2
hooks )(see CJ_ODU_PCB_003-1 ).
Note:Electric control box cover cannot
be removed, so the voltage between P
and N cannot be measured.
Note: This section is for reference only. Actual unit appearance may vary.
Illustration
Outdoor Unit Disassembly 15

Service Manual - VCDxxSA
CJ_ODU_PCB_003-1
