Mars Comfort-Aire Century VCD-SA Series Service Manual page 185

Service Manual - VCDxxSA
4. PCB board 4
Procedure
1) Remove the screws of the top cover.
(1 screws) (see CJ_ODU_PCB_004-
1 ).
2) Unfix the hooks and then open the
electronic control box cover (5 hooks)
(see CJ_ODU_PCB_004-2 ).
3) Disconnect the connector for fan
motor from the IPM board (see CJ_
ODU_PCB_004-3 ).
4) Remove the connector for the
compressor (see CJ_ODU_PCB_004-
3 ).
Note: This section is for reference only. Actual unit appearance may vary.
Illustration
Compressor
Outdoor Unit Disassembly 16

CJ_ODU_PCB_004-1
CJ_ODU_PCB_004-2
CJ_ODU_PCB_004-3
