Mars Comfort-Aire Century VCD-SA Series Service Manual page 188

6. PCB board 6
Procedure
1) Unfix the hooks and then open the
electronic control box cover (4 hooks)
(see CJ_ODU_PCB_006-1 ).
2) Remove 8 screws on the electronic
control board and then turn over
the electronic control board (see
CJ_ODU_PCB_006-2 ).
Note:Electric control box cover cannot
be removed, so the voltage between P
and N cannot be measured.
Note: This section is for reference only. Actual unit appearance may vary.
Illustration
Outdoor Unit Disassembly 19

Service Manual - VCDxxSA
CJ_ODU_PCB_006-1
CJ_ODU_PCB_006-2
