Service Manual - VCDxxSA
Procedure
10) Remove the 2 screws and then
remove the DR module box
subassembly.(see CJ_ODU_
PCB_013-5 )(DR module box
subassembly is on the back of the
electronic control box assembly)(for
some models)
11) Remove the 2 screws and then
remove the DR module board.(see
CJ_ODU_PCB_013-6 )(for some
models)
Note: This section is for reference only. Actual unit appearance may vary.
Illustration
CJ_ODU_PCB_013-5(for some models)
CJ_ODU_PCB_013-6(for some models)
Outdoor Unit Disassembly 34