Mars Comfort-Aire Century VCD-SA Series Service Manual page 195

Service Manual - VCDxxSA
Procedure
1) Remove the 1 screw and disconnect
the wires and then remove the key
board.(see CJ_ODU_PCB_008-4 )(for
some models)
Note: This section is for reference only. Actual unit appearance may vary.
9. PCB board 9
Procedure
2) Remove 3 screws to disconnect the
wires connected to the compressor.
(see CJ_ODU_PCB_009-1)
3) Remove 2 screws to disconnect the
power supply wires. (see CJ_ODU_
PCB_009-1)
4) Disconnect the wires connected to
main control board. (see CJ_ODU_
PCB_009-1)
5) Remove the 4 screws and unfix
the 6 hooks and then remove the
main control board.(see CJ_ODU_
PCB_009-1 )
6) Remove the screw of the fan
capacitor and then remove it (1 screw
for each capacitor). (see CJ_ODU_
PCB_009-1)
Note: This section is for reference only. Actual unit appearance may vary.
Illustration
CJ_ODU_PCB_008-4(for some models)
Illustration
Outdoor Unit Disassembly 26

CJ_ODU_PCB_009-1
