Mars Comfort-Aire Century VCD-SA Series Service Manual page 197

Service Manual - VCDxxSA
10. PCB board 10
Procedure
1) Unfix the hooks and then open the
electronic control box cover (4 hooks)
(see CJ_ODU_PCB_010-1 ).
2) Remove 6 screws on the electronic
control board and then remove the
electronic control box subassembly.
(see CJ_ODU_PCB_010-2 ).
Note:Electronic installing box cannot be
opened, so the voltage between P and N
cannot be measured.
Note: This section is for reference only. Actual unit appearance may vary.
Illustration
Outdoor Unit Disassembly 28

CJ_ODU_PCB_010-1
CJ_ODU_PCB_010-2
