10/100BASET ETHERNET MATING CONNECTOR PINOUT
The following table lists the pin configuration for the standard RJ-45 Ethernet connector.
Pin
Signal
1
Transmit +
2
Transmit -
3
Receive +
4
None
5
None
6
Receive -
7
None
8
None
NOTE: MDI/MDIX AutoCross function will automatically transpose the Transmit and Receive lines if required.
E1 PORT MATING CONNECTOR PINOUT
The following table lists the pin configuration for the standard RJ-48 E1 port mating
connectors.
Pin
Signal
1
Receive 1 (Tip in to unit)
2
Receive 2 (Ring in to unit)
3
None
4
Transmit 1 (Tip from unit)
5
Transmit 2 (Ring from unit)
6
None
7
None
8
None
NOTE: The pin configuration is consistent with a DTE interface.
iMcV-E1-Mux4, Ethernet Enhanced
14
Pin 1
Pin 1