Page 1
User Manual IDK-2115 Series 15" XGA Ultra High Brightness Display Kit with LED Backlight...
Page 2
No part of this manual may be reproduced, copied, translated or transmitted in any form or by any means without the prior written permission of Advantech Co., Ltd. Information provided in this manual is intended to be accurate and reliable. How- ever, Advantech Co., Ltd.
Page 3
Whether your new Advantech equipment is destined for the labo- ratory or the factory floor, you can be assured that your product will provide the reliability and ease of operation for which the name Advantech has come to be known.
Page 4
Because of Advantech’s high quality-control standards and rigorous testing, most of our customers never need to use our repair service. If an Advantech product is defec- tive, it will be repaired or replaced at no charge during the warranty period. For out- of-warranty repairs, you will be billed according to the cost of replacement materials, service time and freight.
LED driving board. The series is also available with flexible options for touchscreens and enhanced treatments such as an AR surface treatment and an optical bonding solution. IDK-2115 series supports 1200 cd/m2 high brightness with low power consumption at a maximum consumption of 16 W. Equipped with a high...
Functional Block Diagram The following diagram shows the functional block of the 15 inches Color TFT-LCD Module: Figure 1.1 Function Block Diagram Touchscreen Driver The touchscreen driver CD-ROM is in the accessories box with the product. Absolute Maximum Ratings Absolute maximum ratings of the module is as following: 1.6.1 Absolute Ratings of TFT LCD Module Item...
Page 12
1.6.3 Absolute Environmental Ratings Item Symbol Min. Max. Unit Conditions Operating Temperature [oC] Operation Humidity [%RH] Note 3 Storage Temperature [oC] Storage Humidity [%RH] Note1: With in Ta= 25°C Note2: Permanent damage to the device may occur if exceeding maximum values IDK-2115 User Manual...
Power Specifications Input power specifications are as follows: Table 2.1: Power Specifications Parameter Symbol Value Unit Note Min. Typ. Max. Power Supply Voltage Ripple Voltage mVp-p Rush Current RUSH Power White (3)a Supply Black (3)b Current Differential “H” Level Input Volt- “L”...
Backlight Driver Conditions Parameter guidelines for LED Light Bar Driver is operation under stable conditions at 25°C (Room Temperature): Table 2.2: Backlight Driver Conditions Item Symbol Values Unit Condition Min. Typ. Max. LED Voltage 17.7 17.7 Note 2, 3 LED Current Note 2 LED Life Time 50,000...
Pixel Format Image Following figure shows the relationship between input signal and LCD pixel format. Pin Description Table 3.1: Pin Description Pin No. Symbol Function Polarity Note Power Supply +3.3V(typical) Power Supply +3.3V(typical) Ground No Connection RX0- LVDS Differential Data Input Negative RX0+ LVDS Differential Data Input...
Note1: Connector Part No.: STM MSB240420G, Entry 3804K-F20N-10L or equiva- lent. Note2: User’s connector Part No.: STM P240420, Entry H204K-D20N-02B or equiv- alent. Note3: “Low” stands for 0V. “High” stands for 3.3V. “NC” stands for “No Connection”. The Input Data Format 3.3.1 SEL68 Note1: Please follow PSWG.
Blue Data 7 Blue Data 6 Blue Data 5 Blue Data 4 Blue-pixel Data, For 8 bits LVDS input, MSB: B7; LSB:B0 Blue Data 3 Blue Data 2 Blue Data 1 Blue Data 0 RxCLKIN LVDS Data Clock Data Enable Signal When the signal is high, the pixel data is valid to be displayed.
3.4.2 Input Timing Diagram Power ON/OFF Sequence To prevent a latch-up or DC operation of LCD assembly, the power on/off sequence should be as the diagram below. Power Sequence Timing Parameter Value Unit Min. Typ. Max. [ms] [ms] IDK-2115 User Manual...
Page 22
[ms] [ms] [ms] [ms] [ms] [ms] [ms] The above on/off sequence should be applied to avoid abnormal function in the dis- play. Please make sure to turn off the power when you plug the cable into the input connector or pull the cable out of the connector. IDK-2115 User Manual...
TFT LCD Module These connectors are capable of accommodating the following signals and consist of the following components. 4.1.1 Connector Table 4.1: Connector Connector Name / Description Signal Connector Manufacture STM MSB240420G, Entry 3804K-F20N-10L Connector Model Number STM P240420, Entry H204K-D20N-02B or equivalent Mating LVDS transmitter: THC63LVDM83A or equivalent device Backlight Unit These connectors are capable of accommodating the following signals and consist of...
Page 25
Table 4.2: Specifications Thermal Shutdown °C Operating Junction °C Temperature Environment Operating Tempera- °C ture Storage Temperature + 85 °C Dimmer Range (Note. PWM Dim- Dimmer VH Dimmer VL Dimmer Frequency 0.25 ON/OFF ≤ Note: When the input 1KHz, the high-level digital output must be greater than the total output level of only 5%.
Page 26
4.2.2.4 Dimensions Figure 4.1 Dimensions IDK-2115 User Manual...
Touchscreen (Optional: for IDK-2115R Only) 5.1.1 Touch Characteristics The touch panel is a resistance type that a customer uses with flat displays like an LCD. Once the operator touches it with a stylus or a finger, the circuit for the touch panel sends coordinate points to a PC from the voltages at the contact points.
Touch Controller (Optional: - for IDK-2115R Only) Advantech’s ETM-RES04C Touch Control Board is the ultimate combo board. This touch panel controller provides optimal performance for 5-wire analog resistive touch panels. It communicates with a PC system directly through USB and RS-232 connec- tors.
Panel resistance of 5-wire resistive model is from 50 to 200 ohm (Pin to pin on same layer) Touch resistance under 3K ohm Serial Interface EIA 232E (Serial RS-232) No parity, 8 data bits, 1 stop bit, 9600 baud (N, 8, 1, 9600) ...
Page 31
5.2.2.2 Combo Interface Connector, JP1, Pins and Signal Descriptions The combo interface connector for USB and RS-232 is a 2.0mm, 10-pin, 90 degree box; male type with lock connector. It is intended to be used with single wired pins in 5+5 pins header.
Optical Characteristics The optical characteristics are measured under stable conditions at 25°C (Room Temperature): Table A.1: Optical Characteristics Item Unit Conditions Min. Typ. Max. Note [degree] Horizontal (Right) CR = 10 (Left) Viewing Angle Vertical (Upper) CR = 10 (Lower) Luminance Uniformity 9 Points 2, 3...
Page 35
Note3: 9-point luminance uniformity is defined by dividing the maximum luminance values by the minimum test point luminance Minimum Brightness of nine points Maximum Brightness of nine points Note4: Measurement method The LCD module should be stabilized at given temperature for 30 minutes to avoid abrupt temperature change during measuring.
Optical Characteristics The optical characteristics are measured under stable conditions at 25°C (room tem- perature). Since front polarizer is easily damaged, pay attention not to scratch it. Be sure to turn off power supply when inserting or disconnecting from input con- nector.
Page 40
Free Manuals Download Website h p://myh66.com h p://usermanuals.us h p://www.somanuals.com h p://www.4manuals.cc h p://www.manual-lib.com h p://www.404manual.com h p://www.luxmanual.com h p://aubethermostatmanual.com Golf course search by state h p://golfingnear.com Email search by domain h p://emailbydomain.com Auto manuals search h p://auto.somanuals.com TV manuals search h p://tv.somanuals.com...
Need help?
Do you have a question about the IDK-2115 Series and is the answer not in the manual?
Questions and answers