SOLTEK KT400-R Manual page 88

3. Press "1" to display the Auto Setup Menu below. This is the fastest
and easiest method to create your first array.
Optimize Array for:
Mode ............................................... Stripe
Spare Drive .............................................0
Drives used in Array ................................1
Array Disk Capacity .........................38166
[ ] Up [ ] Down [ , , Space] Change Option [ESC] Exit [Ctrl-Y] Save
4. Using the Spacebar, choose "Security" under the Optimize Array
for section.
5. Press <Ctrl-Y> keys to Save your selection.
6. Reboot your system.
7. Once the array has been created on new drive(s), you would need to
FDisk and format the array as if it were a new single hard drive.
8. Also proceed to "Installing Drivers" section of this Chapter for system
and FastTrak 376 Driver setup.
[Auto Setup Options Menu]
[Array Setup Configuration]
[Keys Available]
93
Chapter 5 RAID Controller
Performance