4-6.11 Set Supervisor Password - SOLTEK KT400-R Manual

4-6.11 Set Supervisor Password

This option allows you to set a Supervisor password for the system:
1. Choose "Set Supervisor Password" in the Main Menu and press
<Enter>. Then the following message appears:
[ Enter new supervisor password ]
2. The first time you run this option, enter your password up to 8 char-
acters and press <Enter>. (The screen does not display the entered
characters.)
3. After you enter the password, the following message appears prompt-
ing you to confirm the password:
[ Retype new supervisor Password ]
4. Enter the same password "exactly" the same as you have just typed
to confirm the password and press <Enter>.
5. The following message appears to confirm the new password setup.
6. Then press any key to continue your CMOS Setup. To save the pass-
word setup, you should press "Save & Exit Setup" and choose "yes"
to exit and save setup.
7. After the Supervisor password is set, you have to choose whether
the password is for entering the system or only for entering BIOS
Setup program. To make the choice, please enter BIOS Setup and
choose "Advanced BIOS Features" in the main menu. (At entering
BIOS Setup, you have to enter the password now.) In "Advanced
BIOS Features", choose "Password Check" and change the option.
The "Setup" option is to set the password only for entering BIOS
Setup. The "Always" option is to set the password for entering the
system.
[ New supervisor password installed ]
Any Key to Continue
85
Chapter 4 BIOS Setup