Install Via Lan Drivers (For Kt400-Rl Only); Via6183 Lan Driver On Windows 9X - SOLTEK KT400-R Manual

KT400-R / KT400-RL

3-6 Install VIA LAN Drivers (for KT400-RL only)

3-6-1. VIA6183 LAN driver on Windows 9X

The VIA 6183 LAN driver contained in the Support CD supports VIA
6103 LAN chip. Yet it is not included in the Autorun Menu. To install VIA
LAN driver on Windows 9X, please follow the steps shown below:
1. On the "Start" screen of your system, please click to the following
path:
\My Computer\properties\Device manager
2. In the "Device manager" screen, you can see the item " PCI Ethernet
Controller" with a yellow question mark on its left side, which indicates
that the LAN controller is already detected by system but the driver
for the on-board LAN Ethernet Controller is not installed yet. Please
point to this item with your mouse and double click on it (or click the
"Properties" button).
3. Instantly, the "PCI Ethernet Controller Properties" screen shows up.
Please click the "General" bar to continue.
4. In the "General" screen, click "reinstall Driver" button to continue.
Please note that the status of "Device Usage" should stay at "Exists
in all hardware profiles".
Click here
52