SOLTEK KT400-R Manual page 93

KT400-R / KT400-RL
5-2.2-4 Installing Drivers With Existing Windows 95/98
The following three sections detail the installation of the FastTrak 376 driv-
ers on a system that has Windows 95/98 already installed. If you're
installing the FastTrak 376 drivers on a system during a Windows 95/98
installation, see "Installing Drivers During Windows 95/98 Installation".
5-2.2-5 Windows 98
1. Connect your hard drive(s) for RAID Array to IDE3/SATA1/SATA2,
and enable FastTrak 376 Controller in BIOS. Configure the hard drive(s)
for RAID Array, power up the system and boot Windows.
2. The "Add New Hardware Wizard" will appear, informing you that it has
found a "PCI RAID Controller."
3. Check the "Search for the best driver for your device" box and click the
Next button.
4. Check the "Specify a Location" box and click the Next button.
5. Type "A:\WIN9x-ME" in the text box that appears.
6. Insert the "FastTrak 376 Driver" diskette in drive A:.
7. Click on "Next." The Add New Hardware wizard will say it has found
"Win95-98 Promise FastTrak 376 Controller".
8. Click on "Next," and then on "Finish."
9. Choose "Yes" when asked if you want to restart your computer. Be sure to
remove the diskette from drive A:.
5-2.2-6 Windows 95
1. Connect your hard drive(s) for RAID Array to IDE3/SATA1/SATA2,
and enable FastTrak 376 Controller in BIOS. Configure the hard drive(s)
for RAID Array, power up the system and boot Windows.
2. The "Update Device Drive Wizard" will appear, informing you that it has
found a "PCI Mass Storage Controller."
3. Insert the "FastTrak 376 Driver" diskette in drive A:.
4. Type "A:\WIN9x-ME" in the text box, then click on "Next." Windows
will inform you that it has found the "Win95/98 Promise FastTrak
376 controller".
5. Click on "Finish," and when prompted to insert the "FastTrak 376 Driver"
diskette, click on "OK."
6. If a message informing you that the file "Win95/98 Promise FastTrak 376.
MPD" cannot be found, go to the "Copy files from:" text box and type:
"A:\WIN9x-ME".
98