Advertisement
7
2400EJF NOZZLE OPTIONS & PATTERN SIZES
NOTE: Pattern sizes listed are approximate. Variations in voltage caused by regional electrical differences or
voltage drop due to long power cords may result in reduced pattern sizes.
•
All five nozzles are included with the 2400EJF package.
•
The Cypress is the only nozzle that uses the separate collar labeled C2.
•
The Cypress, Linden, Willow, and Juniper nozzles use the 3/8" x 4" bolt.
•
The Sequoia nozzle uses the shorter 3/8" x 2.25" bolt.
Cypress Display: Produces a 9-stream
arch 1.3 meters tall by 2.8 m wide. The
Cypress nozzle (marked C1 on fin) makes
use of the collar (marked C2 on the top
rim) and the 3/8" x 4" bolt.
Willow Display: Produces a cone of
water 0.9 meters tall by 3.5 m wide. The
Willow nozzle (marked W on the inside
of the cone) uses the 3/8" x 4" bolt.
Linden Display: Produces a two-tiered
display with a center column 1.3 meters
tall by 0.7 m wide and an outer cone 0.6
m tall by 3.7 m wide. The Linden nozzle
(marked L inside one of the fins) uses the
3/8" x 4" bolt.
Juniper Display: Produces a wide cone
of water 0.7 meters tall by 3.9 m wide.
The Juniper nozzle (marked with J on in
inside of the nozzle cone) uses the 3/8" x
Sequoia Display:
Produces a narrow
column of water
1.6 meters tall by
1 m wide. The
Sequoia nozzle is
not marked and
uses the shorter
3/8" x 2.25" bolt.
Advertisement
