Advertisement
20
Horizontal
Angled Up
Angled Down
STEP TWELVE
Attach the Ropes to the front (on the cage) and back
(around the Draw Band) of the motor. At this time,
use the Nylon Tie provided to connect the power cord
and front Rope to prevent the cord from tangling in
the prop. Also, if the power cord has a Quick Dis-
connect and Additional Strain Relief install the Quick
Disconnect and Strain Relief per instructions on
pages 4-5.
STEP THIRTEEN
Float the circulator in the water and position where
desired. Tie the front Rope to a stake on the shore or
weight. If a weight is used sink weight in front of
unit so rope is taught. (Circulator create great force,
make sure weight is enough to prevent movement.)
Tie back Rope to a stake on opposite shore or weight.
Sink weight behind the unit so rope is taught. At this
time take up any slack in the line.
STEP FOURTEEN
You can now plug the Circulator into the GFI pro-
tected power source at the ponds edge.
ENJOY YOUR NEW KASCO CIRCULATOR!
Advertisement
