Partner PT-4000i User Manual page 76

Boot Up NumLock Status
This item defines if the keyboard Num Lock key is active when your
system is started. The default setting is On.
Gate A20 Option
This item defines how the system handles legacy software that was
written for an earlier generation of processors. Leave this item at the
default setting. The default setting is Fast.
Typematic Rate Setting
If this item is enabled, you can use the following two items to set the
typematic rate and the typematic delay settings for your keyboard. The
default setting is Disabled.
Typematic Rate (Chars/Sec)
Use this item to define how many characters per second are generated by
a held-down key. The default setting is 6.
Typematic Delay (Msec)
Use this item to define how many milliseconds must elapse before a held-
down key begins generating repeat characters. The default setting is 250.
Security Option
If you have installed password protection, this item defines if the
password is required at system start up, or if it is only required when a
user tries to enter the Setup Utility. The default setting is Setup.
PCI/VGA Palette Snoop
This item is designed to overcome some problems that can be caused by
some non-standard VGA cards. This board i n cludes a built -in VGA
system that does not require palette snooping so you must leave this item
disabled. The default setting is Disabled.
OS Select For DRAM > 64 MB
This item is only required if you have installed more than 64 MB of
memory and you are running the OS/2 operating system. Otherwise, leave
this item at the default. The default setting is Non-OS2.
66