Table of Contents
Advertisement
CPU L2 Cache ECC Checking
This item enables or disables ECC (Error Correction Code) error
checking on the CPU cache memory. We recommend that you leave this
item at the default setting. The default setting is Enabled.
Processor Number Feature
Some new processors are installed with a unique processor number. This
number may be used for verification in Internet transactions and e-
commerce. If you prefer not to use or distribute the unique processor
number, disable this item to suppress the processor number. The default
setting is Enabled.
Quick Power On Self Test
Enable this item to shorten the power on testing (POST) and have your
system start up faster. You might like to enable this item after you are
confident that your system hardware is operating smoothly. The default
setting is Enabled.
Boot From LAN First
Enable this item to allow the system to boot from the Local Area Network
(LAN). The default setting is Disabled.
Boot Sequence
Use these three items to select the priority and order of the devices that
your system searches for an operating system at start-up time. The default
setting is A, C, SCSI.
Swap Floppy Drive
If you have two floppy diskette drives in your system, this item allows
you to swap the assigned drive letters so that drive A becomes drive B,
and drive B becomes drive A. The default setting is Disabled.
Boot Up Floppy Seek
If this item is enabled, it checks the size of the floppy disk drives at start-
up time. You don't need to enable this item unless you have a legacy
diskette drive with 360K capacity. The default setting is Enabled.
65
Advertisement
Table of Contents
