Table of Contents
Advertisement
Drive A/Drive B (1.44M, 3.5 in./None)
These items define the characteristics of any diskette drive attached to the
system. You can connect one or two diskette drives.
Video (EGA/VGA)
This item defines the video mode of the system. This mainboard has a
built-in VGA graphics system; you must leave this item at the default
setting.
Halt On (All Errors)
This item defines the operation of the system POST (Power On Self Test)
routine. You can use this item to select which types of errors in the POST
are sufficient to halt the system.
Base Memory, Extended Memory, and Total Memory
These items are automatically detected by the system at start up time.
These are display-only fields. You cannot make changes to these fields.
Base Memory – This field displays the amount of conventional
memory detected by the system during boot.
Extended Memory – This field displays the amount of extended
memory detected by the system during boot-up.
Total Memory – This field displays the total amount of memory
(Base and Extended) detected by the system during boot-up.
Press <Esc> to return to the main screen.
63
Advertisement
Table of Contents
